Turning Point Propellers Hustler (14 x 21") RH Propeller, 21502131
Squeeze Cast for Added Strength:
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Diecast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.
Long Lasting Ultracoat™ Powder Coated Finish:
Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.
Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
- Hustler® Aluminum Dual Geometry 4 Blade Props for 90300+hp Engines with 4.75" Gearcases.
- 4 Blades That Rewrote the Rules. The props that put the “four” in Performance! These props rewrote the rules, proving that you can run a four blade that has: unprecedented hole shot, lift, handling, ease of steering, and rough water stability. No top end speed loss you experience with other manufacturers’ 4 blade propellers – keeps 3 blade top end speed. Lifts the entire boat higher out of the water. By lifting the hull higher, boats tend to lose less speed when fully loaded versus a three-blade prop. With a lightly loaded boat, a three blade is usually the faster prop for most applications. Alternatively, when an application is loaded down with extra people and gear, a three bladed prop can lose up to 3 MPH. This is because the hull is forced deeper into the water causing more wetted surface by the added weight. By lifting the hull higher the Turning Point 4 blade when fully loaded does not lose the top end speed compared to a three blade propeller.
- This Dual Geometry propeller is uniquely engineered with two blade geometries: two blades utilize the Hustler high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and two blades utilize an offshore style design for high speed and maximum stern lift. These props rewrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top end speed loss you experience with other manufacturers’ propellers.
- Stainless steel performance at aluminum prices with tuned exhaust vents improve hole shot.
- 4 blade Dual Geometry prop that has 3 blade top end speed with fast hole shot and unmatched handling.
- Squeeze casting adds strength that boosts performance with protected by five step powder coated finish.
- Propellers fit COX®, Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, OXE®, Parsun®, Suzuki®, Tohatsu®,Volvo Penta®, & Yamaha® Outboards and Sterndrives.
- Uses 500 series Installation/hub kits only.
- See application chart for engine application information and required Installation/hub kit part numbers.